Product portfolio

Refinery products.

Eight product families across middle distillates, light distillates, residual fuels, pressurised gases, heavy products, lubricant stocks and renewable carriers.

Container terminal gantry cranes silhouetted against a sunset sky

Catalogue

Eight product families.

Each entry lists the governing specification, the grades we work with, the delivery bases supported and the documentation issued with the cargo.

Middle distillates

EN 590 Diesel

Automotive gas oil to the EN 590 specification, in 10 ppm and 50 ppm sulphur grades.

EN 590 is the European standard for automotive diesel. We work with refinery and primary-storage origin material, quoted against published index pricing with an agreed differential, and inspected by an independent surveyor at the loading point.

Aviation fuels

Jet A-1

Aviation turbine fuel to DEF STAN 91-091 and ASTM D1655, with full batch documentation.

Aviation fuel is only as good as its paper trail. Jet A-1 is supplied with refinery certificates of quality, recertification at the delivery point where the contract requires it, and a documented chain of custody from the loading installation onward.

Light distillates

Motor Gasoline

Unleaded gasoline in RON 91, 95 and 98 grades to EN 228, blended to destination.

Gasoline grades, oxygenate content and vapour pressure vary by destination market and season. Every offer is built around the receiving market's specification rather than a generic grade, and blending is confirmed before the nomination is fixed.

Pressurised gases

LPG

Propane, butane and commercial mixes, supplied against pressurised and refrigerated logistics.

LPG trades on logistics as much as on product. Propane, butane and mixed grades each carry their own vessel, pressure and temperature requirements, so the discharge arrangement is agreed with the receiving terminal before the cargo is committed.

Residual fuels

Fuel Oil

High and low sulphur residual grades, including marine fuels to ISO 8217.

Residual fuel is specified by viscosity, sulphur and stability rather than by a single grade name. Marine parcels are supplied to ISO 8217 with the regulatory sulphur limit for the trading area stated on the nomination.

Heavy products

Bitumen

Penetration-grade and polymer-modified binders for road construction programmes.

Bitumen is a temperature-managed product from the loading arm to the paver. Penetration grades, modified binders and emulsions are supplied against the receiving plant's handling capability, with loading temperature confirmed on every nomination.

Lubricant stocks

Base Oils

Group I, II and III base stocks for lubricant blending and industrial formulation.

Base stocks are bought on viscosity index, volatility and purity. Group I through III material is supplied with batch analysis, in flexitank, drum or bulk form depending on the blender's intake arrangement.

Renewable products

Biofuels

HVO, FAME and used cooking oil with recognised sustainability certification.

Renewable fuel is a documentation product. HVO, FAME and feedstock parcels are supplied with proof of sustainability under a recognised voluntary scheme, so the receiving party can account for the volume in its own compliance reporting.

Before you send

What to include in an RFQ.

A requirement with these six items can be priced the same day. Without them, any number we give you would be an indication rather than an offer.

Open the RFQ form
Registered buyer entity and jurisdictionProduct, grade and specificationMonthly volume and contract durationDelivery basis and discharge pointPricing index and acceptable differentialPayment instrument and issuing bank